internal cooling
英 [ɪnˈtɜːnl ˈkuːlɪŋ]
美 [ɪnˈtɜːrnl ˈkuːlɪŋ]
网络 内冷; 内部冷却; 内冷却
双语例句
- In this research, the13% suction air reduced the pressure loss by20% while keeping the same heat transfer enhancement as the0% suction condition, which is good for the internal cooling design.
当带气膜孔抽吸的蛇形通道在13%抽吸量条件下，其压力损失减小约20%，同时保持传热强化程度不变，这对于内部冷却的设计是有利因素。 - Restoring the internal cooling systems remains the best hope for stabilising the plant and moving beyond the ad hoc emergency measures of helicopter water drops and spraying with water cannons.
恢复内部冷却系统，仍是稳定核电站、告别直升机洒水和高压水枪喷水等临时紧急措施的最佳希望所在。 - The Effect of Internal Cooling Channel on the Heat Transfer of Outer Surface Film Cooling
内冷通道特性对外表面气膜冷却换热影响研究 - A Method for Sealed Performance Evaluation of Internal Cooling Water System of Generator and Relevant Solutions
发电机内冷水系统密闭性能评判方法及应对策略 - Practice and Analysis of Tube Sheet Hardling with High-speed Internal Cooling Shallow Boring
高速内冷却浅孔钻加工管板实践与分析 - Aerodynamic Investigation of Flow Characters of Internal Cooling Channel with Both Rib-roughened Walls and Film Hole Suctions; Effects of air injection on outlet flow field of compressor cascade
有肋和气膜孔出流的通道内流动特性研究孔隙射流结构对扩压叶栅出口流场特性的影响 - Compared to the channel with uniform section area, those with various section areas are much similar to the internal cooling structure of the turbine blade.
与等截面回转通道相比较，变截面通道更接近叶片内冷通道原型。 - The conclusions can provide the basic data to the optimum design of the internal cooling of turbine blade.
实验结论可为大型发动机涡轮叶片的内部冷却结构优化设计提供基础依据。 - Effect of Helix-Alike Fin Surface Shape on Flow and Heat Transfer in the Internal Cooling Passage adjustable blade
肋片几何形状对仿螺旋肋片内冷通道流动与换热的影响可调叶片可调螺旋桨叶 - The structure and character of internal cooling system of a contact welding machine were developed by Russia scholar.
介绍了俄罗斯研制的某接触点焊机中电极内部冷却系统结构及特点。 - The study on internal cooling watercourse of pressured quenching mold for circular saw blade
木工圆锯片内冷水道式加压模具淬火的实验研究 - Internal cooling of ejector rods and cooling of plugs could not meet the needs of production process and consumption of plugs was large.
针对顶杆内冷及顶头冷却满足不了生产工艺要求和顶头消耗大等现状，提出了一种先进合理的给水工艺改造方案。 - After analyzing and testing, the reasons of axial vibration of generator set were found out: the thermal deformation occurred in a local part of the rotor due to the blockage in the internal cooling water tube caused the abnormal axial vibration.
针对发电机组轴向振动产生的原因进行了分析和检测，发现了内冷水导管堵塞引起的转子局部热变形是造成轴向振动过大的原因。 - Moreover, the notion of best water-injection crank angle was put forward, which provided theoretical basis to design and improve the performance of water-injection internal cooling in the reciprocating compressors.
并在此基础上提出了最佳喷水角的概念，为活塞压缩机喷水内冷却技术的实现及性能改进提供了一定的理论依据。 - The results can contribute to turbine blade internal cooling designing.
文章的结果对于涡轮叶片内流冷却通道的设计具有参考意义。 - E. M. The boundary condition consists of convective heat transfer of gas heating, internal cooling, film cooling and impinging cooling.
计算的边界条件包括燃气加热，内部对流冷却，气膜冷却和冲击冷却的对流换热。 - Analyzes the water leakage phenomenon, the relationship between temperature and moisture of double-water internal cooling generator, puts forward the demand of generator water leakage detection, illustrates how to determine the water leakage of generator and the points for attention of SCJ-2 moisture differential leak detector operation.
讨论和分析了双水内冷发电机的漏水现象、发电机的温度与湿度的关系，提出了对发电机检漏的要求，并阐述了如何确定发电机的漏水以及SCJ-2型湿度差动检漏装置的运行注意事项。 - This paper considers leaking, heat transfer and internal cooling for spraying water, and has established a mathematical model for Practical working process of Positive displacement compressor, and has plained computer simulating program.
本文考虑泄漏、传热和喷水内冷却等因素，建立了变容式压缩机实际工作过程的数学模型和简明的计算机模拟程序。 - Internal Cooling System for Blown Film Bubble
吹塑薄膜膜泡冷却系统的设计研究 - In this thesis, numerical simulation is employed together with experimental investigation to study the special characteristic of 3-D turbulent flow field, heat transfer coefficient distribution and average duct pressure loss in the newly proposed internal cooling channel with helix-alike fins.
为了详尽了解新提出的仿螺旋肋片内冷通道特有的三维流场特性、通道换热特性以及通道流动阻力特性，本文采用数值模拟和实验研究相结合的方法对其进行了系统的研究。 - Technical characteristics, main points in operation and use are presented of the internals for internal cooling adiabatic ammonia converters and the internals for quasi isothermal methanol converters, and the existing problems are analyzed.
介绍了内冷&绝热氨合成塔内件和准等温型甲醇合成塔内件的技术特性、操作要点及应用情况，并对存在的问题进行了分析。 - Management and Control Technique of Internal Cooling Water Quality for Large Generator
大型发电机内冷却水质量管理与控制技术 - Research on Pressure Coefficients of Turbine Blade Internal Cooling Passages
涡轮叶片内流冷却通道中压力系数的研究 - Study and Application of Mixed Bed Treatment of Generator Internal Cooling Water
发电机内冷水混床处理的研究与应用 - Particular emphasis is given to the development of film cooling, internal cooling technologies and film hole discharge coefficients.
着重介绍了气膜冷却、涡轮叶片内流冷却技术和气膜孔流量系数的研究进展。 - Specially to the thermal problem of turbine blade with internal cooling.
特别适用于带有内冷通道的涡轮叶片的换热问题。 - Design the inner fluid field structure of straightening roller reasonably is very important for its internal cooling. ( 4) The steady temperature field and transient temperature field of straightening roller are simulated.
合理设计矫直辊的内流场结构，对于其内部降温具有重要的意义。（4）计算了矫直机矫直辊系的稳态温度场和瞬态温度场。 - Considering the effect of refrigeration and cooling, we give the temperature distribution of straightening roller, internal cooling water and external air at different time.
考虑冷却降温效果，给出了不同时刻矫直辊、内冷水和外部空气的温度分布。 - With developing demand of internal cooling technique in large capacity electrical machinery, fundamental research of evaporative cooling technique in the area of rotor cooling is urgently needed.
随着大容量电机对内冷技术的要求不断提高，因此迫切需要开展蒸发冷却技术在转子冷却方面的基础研究。